A heavy steel gate puts a lot of strain on its hinges. Every time it swings, the weight of the gate tries to pull the top hinge away from the post and push the bottom one into it. Choose heavy duty gate hinges that are too small, or fit them out of line, and the gate soon sags, drags on the ground or becomes hard to close.
Hinge Master Sales has supplied hinges and hardware to fabricators, body builders and the trailer and truck trade since 1986. This guide explains the main types of heavy duty gate hinges for steel gates, how to choose the size, how to fit them so the gate swings true, how to keep them working, and how to request a quote. It covers weld-on hinges for steel gates, not screw-on hinges for wooden garden gates.
What makes a gate hinge heavy duty?
A heavy duty gate hinge is built to carry the weight and leverage of a steel gate, not just to let it swing. In practice that means:
- A thick body and a solid pin that will not bend or wear oval under load.
- Weld-on fixing, so the hinge becomes part of the post and the gate frame instead of relying on screws.
- A smooth pivot, often with a way to grease it, so a heavy gate still opens easily after years of use.
- A size matched to the gate. The wider and heavier the gate, the bigger the hinge it needs.
Leverage matters as much as weight. A wide gate pulls harder on its hinges than a narrow gate of the same weight, because the load sits further from the post.
Types of heavy duty gate hinges
Bullet hinges (weld-on barrel hinges)
Bullet hinges are the most common heavy duty gate hinges for steel swing gates. Each hinge has two barrel-shaped halves: one is welded to the post and the other to the gate, and the gate half sits over the pin. They are neat, strong and hard to tamper with once welded. Our heavy duty bullet hinges page explains how they work in more detail.
Our Small Trailer Hinges range includes these bullet hinges, from light to heavy:
| Product name | Notes |
|---|---|
| BULLET HINGE M10x50 | The smallest size in the range, for light gates and hatches |
| BULLET HINGE M12x100 | Light to medium gates |
| BULLET HINGE M16x100 | Medium gates |
| BULLET HINGE M20x70 | A shorter M20 size |
| BULLET HINGE M20x100 | For heavier steel gates |
| BULLET HINGE M20x100 with GR/NIPP | As above, with a grease nipple |
| BULLET HINGE M30x120 | The largest size in the range, for the heaviest gates |
| BULLET HINGE M30x120 with GR/NIPP | As above, with a grease nipple |
The size is in the product name, so it is easy to match a hinge you already use. “GR/NIPP” means the hinge has a grease nipple, so you can grease the pivot without taking the gate off. That is worth having on a heavy gate that is opened many times a day.
Butterfly hinges
A butterfly hinge has two wide leaves that spread the load over a larger area of the frame. Our BUTTERFLY HINGE – STEEL BRASS PIN is a weld-on steel hinge with a brass pin. Our heavy duty butterfly hinges page covers where they work best.
Stainless steel butt hinges
For a lighter gate or a pedestrian gate in a wet or coastal area, where bare steel rusts quickly, a stainless steel butt hinge can be a better fit than heavy duty gate hinges in bare steel. Our range includes BUTT HINGE – 100MM S/STEEL (100X75X2) WITH BEARINGS and BUTT HINGE – 100MM S/STEEL (100X76X3) WITH BEARINGS. Our stainless steel hinges guide explains when stainless is worth the extra cost.
How to choose the right size of heavy duty gate hinge
Before you request a quote, write down:
- The gate’s size: its width and height.
- Its approximate weight, or the steel it is made from (tube, angle iron, mesh or sheet cladding).
- How often it is used, from a farm gate opened once a day to a yard gate opened all day long.
- The environment: inland, coastal, or exposed to washing and chemicals.
- The post: its size and material, because the hinge must be welded to something just as strong.
As a rule of thumb, when you are between two sizes of heavy duty gate hinges, choose the bigger hinge. Most gates use two hinges. A tall or very heavy gate is often given a third hinge in the middle, and a very wide gate may need a gate wheel or other support at the far end, so the hinges are not carrying all the leverage on their own. If you are not sure, send us the gate’s dimensions and weight and our sales team will help you match the hinge.
Fitting tips for weld-on gate hinges
These tips apply to most bullet and butterfly heavy duty gate hinges. Always follow safe welding practice, and use a qualified welder if you are not experienced.
- Keep the hinges in line. Every hinge must sit on the same vertical line. If one is out, the gate binds and wears the pins quickly.
- Set the gap first. Prop the gate at the right height and gap from the post, with packing underneath, before you weld anything.
- Tack, test, then weld. Tack each hinge, swing the gate to check it opens and closes freely, and only then complete the welds.
- Keep weld away from the joint. Do not let weld or spatter run into the gap between the two halves, or the hinge can seize.
- Protect the steel. Clean, prime and paint bare steel hinges and welds after fitting, but keep paint out of the pivot.
Looking after heavy duty gate hinges
A few minutes of care keeps heavy duty gate hinges, and the gate, swinging smoothly:
- Grease hinges with a grease nipple regularly, and more often on a busy gate.
- Look for sagging, scraping or a gate that no longer latches easily. These are early signs of a worn pin or a hinge that is too small.
- Check the welds and the post for cracks or rust, especially after a hard knock.
- Replace worn hinges in pairs or sets, so the new hinges stay in line with each other.
Gate hinges and other heavy hinge types
Gate hinges are only one part of the range. If you are building or repairing doors on a truck body, trailer or container, see our guides to heavy duty hinges, hinge types and trailer door hinges. Many of the same rules apply: match the hinge to the weight, keep it in line and protect it from corrosion.
Request a quote on heavy duty gate hinges
Hinge Master Sales quotes on the exact parts and quantities you need. We do not sell online. Browse the Small Trailer Hinges range, add the hinges you need to the Enquiry Cart, and request a quote. Include the gate’s size and weight, the type of hinge you have in mind and how many you need, and our sales team will come back to you with a price.
We have been based in Sebenza, Edenvale since 1986, and we deliver nationwide across South Africa and export to customers outside the country. Fabricators and trade customers who need hinges regularly are welcome to contact our sales team about their requirements.
Frequently asked questions about heavy duty gate hinges
What is the best hinge for a heavy steel gate?
For most heavy steel swing gates, a weld-on bullet hinge is the best choice, because it is strong, neat and hard to tamper with. Choose a large size, such as M20x100 or M30x120, for heavier gates, and a version with a grease nipple if the gate is used often.
How many hinges does a heavy gate need?
Most gates use two hinges. A tall or very heavy gate is often given a third hinge in the middle, and a very wide gate may also need a wheel or other support at the far end, so the hinges do not carry all the leverage.
What does GR/NIPP mean on a bullet hinge?
It means the hinge has a grease nipple. You can grease the pivot with a grease gun without removing the gate, which keeps a heavy gate swinging smoothly and reduces wear.
Why is my steel gate sagging?
A sagging gate usually has hinges that are too small for its weight and width, hinges that were welded out of line, or worn pins. Check the welds and the post as well. Fitting larger heavy duty gate hinges, or adding a third hinge or a wheel, often solves the problem.
Can I buy heavy duty gate hinges online from Hinge Master?
No. Hinge Master Sales quotes on your exact parts and quantities. Add the hinges to the Enquiry Cart on our website and request a quote, or contact our sales team with the gate’s size and weight.





























Recent Comments